PLUVONIN Waterproofing spray 200ml Ballistol (bl-25000)

BRAND BALLISTOL

The waterproofing spray is also universal for shoes, jackets, gloves, backpacks, tents, sails, canopies and much more. Furthermore, our spray dries quickly and the protection lasts particularly long.
The treated surfaces stay clean much longer after spraying and look much better. The lifespan of impregnated materials is extended.

Different materials in a garment are the rule rather than the exception. It is therefore recommended to use a universal waterproofing spray for jackets, trousers and other clothing. With Ballistol waterproofing spray you can, for example, waterproof the following:
- Rain jacket, down jacket and winter jacket
- Ski jacket and ski suits
- Leather jacket, rain pants and functional clothing
- Coats, windbreakers and sweaters
- Sportswear, hiking gear, outdoor clothing

HOW TO APPLY IT:
- Clean the respective surface as recommended by the manufacturer and then let it dry.
- Shake the can vigorously (about one minute).
- Maintain a distance of approximately 20-30 cm.
- Start spraying close to the surface.
 With spray cans it is inevitable that at the beginning of the spraying process a few drops are occasionally squeezed out and are not completely finely atomized. If these droplets fall on sensitive surfaces such as suede, a stain will form. Spray outside first and then direct the fine mist onto the desired surface without releasing it. If droplets still form, remove them immediately with a clean, absorbent cloth or kitchen paper. Just put the cloth on without rubbing.
- In just one pass
Apply the mist spray evenly to the surface so that it sprays in a thin layer everywhere. Do not spray specifically or repeatedly on one area.
- Leave the surface to dry for at least 45 minutes at room temperature.

For 1 m² you need approximately 200 ml of waterproofing spray.

Capacity: 200ml.
Made in GERMANY.