ERGAL BLUEPOWER piston head with DELRIN BEARING TopMax (tmtpbp-e)

The front shape of the BLUEPOWER piston head has been designed to further reduce stresses due to the impact with the PAD of the cylinder head even at more higher R.O.Fs.. The BLUEPOWER piston head has the double O-RING of sealing/stabilization, to avoid contact with the cylinder interal surface. The total height of the TopMax piston head is standardized to the size of the other piston heads on the market. The ERGAL and DELRIN insert for fixing the piston head on the piston is slightly shorter than the standard market size, so you can use the TopMax piston head on any piston on the market.

The BLUEPOWER piston head is designed to have a much narrower compression chamber than the REDPOWER to have a faster compression phase on the O-RING, a fster opening time and ensuring that the cylinder’s air volume is fully compressed almost instantly as soon as the O-RING overtakes the cylinder milling. In terms of air tightness and compression speed, the BLUEPOWER head is one of the best performing piston heads on the market.

It can be used into any configuration, from low-R.O.Fs. to high-R.O.Fs., but we recommend using the BLUEPOWER piston head on high R.O.Fs. configurations with short/super short inner barrels, to take advantage of early compression that comes from the position of the anti-vacuum holes. The stress-tests on the BLUEPOWER piston head were performed with a more powerful springs than those required by italian law, so the product will guarantee reliability and performance even with more advanced configurations. For maximum performance, we recommend pairing the piston head with the TopMax piston and cylinder head.