CNC Aluminum Hop Up Chamber M4W Pro for M4/M16 HPA MTW Maxx Model (mx-hop010mw)

BRAND MAXX MODEL

Hop Up M4W - PRO Chamber Maxx Model.
In aluminum, with CNC machining.
Predisposition for led illuminator.
On HPA MTW Milspec, Forged, Billet and MTW-9 series.

Features:
Removable Steel Pivot Pin for ease of setup and maintenance.
Accepted the HPA MTW Engine M4 nozzle length.
Included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting

SPECIFICATIONS:
Overall Length: 51.15mm
Overall Height: 22mm
Inlet Adaptor Outer Diameter (to fit into HPA Nozzle Outlet): 11mm
Hub Outer Diameter (to fit into Outer Barrel): 12mm
Hub Inner Diameter (to fit Nozzle): 8mm
Material: Aluminum 6061

IN THE BOX:
1 x CNC Aluminum Hopup Chamber M4W unit
2 x CNC Acrylic Side Cover
2 x CNC Brass 2.6mm Side Wing
1 x CNC Steel Pivot Pin
1 x CNC Aluminum Hopup Lever
1 x CNC Aluminum Soft Round Nub
1 x CNC Aluminum Soft Flat Nub (4mm)
1 x CNC Aluminum Hard Concave Nub (4mm)
3 x Steel Nub Spring
1 x CNC Steel Spring Guide
1 x Steel Upper Compression Spring
1 x Steel Center Compression Spring
1 x CNC Delrin Locking C-Clip
1 x CNC Brass Barrel Spacer
1 x Brass Barrel Spacer Holder Oring
1 x CNC Aluminum Rotary Dial Knob
1 x CNC Aluminum Inlet Adaptor (OD11mm)