CNC Aluminum Hop Up Chamber M4A Pro for M4/M16 AEG Maxx Model (mx-hop010ma)
BRAND MAXX MODEL
Hop Up M4A - PRO Chamber Maxx Model.
In aluminum, with CNC machining.
Transverse adjustment ring nut, with maximum precision.
Predisposition for led illuminator.
For Marui M4 / M16 series (including G&G, KRYTAC, excluding KWA).
The Hop Up was designed with BB Latching System to avoid dropping the BBs after removing the charger.
The locking system can also be opened manually to release the dots.
Use a slot pusher with a length of 21.00 to 21.25 mm.
Overall Length: 51.65mm
Overall Height: 37.75mm
Inlet Adaptor Outer Diameter (to fit into Gear Box): 11mm
Hub Outer Diameter (to fit into Outer Barrel): 12mm
Hub Inner Diameter (to fit Nozzle): 8mm
Feeder Outer Diameter (to fit magazine): 8.85mm
Feeder Length (to fit magazine): 6mm
Material: Aluminum 6061
IN THE BOX:
1 x CNC Aluminum Hopup Chamber M4A Pro (with BB Latching System) unit
2 x CNC Acrylic Side Cover
2 x CNC Brass 2.5mm Side Wing
1 x CNC Steel Pivot Pin
1 x CNC Aluminum Hopup Lever
1 x CNC Aluminum Soft Round Nub
1 x CNC Aluminum Soft Flat Nub (4mm)
1 x CNC Aluminum Hard Concave Nub (4mm)
3 x Steel Nub Spring
1 x CNC Steel Spring Guide
1 x Steel Upper Compression Spring
1 x Steel Center Compression Spring
1 x CNC Delrin Locking C-Clip
1 x CNC Brass Barrel Spacer
1 x Brass Barrel Spacer Holder Oring
1 x CNC Aluminum Rotary Dial Knob
1 x CNC Aluminum Inlet Adaptor (OD11mm)
1 x CNC Brass Inlet Spacer