Adjustable Nozzle for G&G LevAR Waldo Dynamics® (WD-LEV-ANZ)

BRAND WALDO DYNAMICS®

The Adjustable Nozzle by WALDO DYNAMICS®, developed in collaboration with Bristol Based Airsoft (BBA), is designed to provide precise power control and maximum versatility for G&G LevAR 15" and 7" platforms.

This upgrade allows users to easily adjust rifle output from approximately 1 Joule up to 2.2+ Joules, making it suitable for both CQB and long-range sniper configurations.

Adjustment is performed using the included grub screw, allowing fast and precise tuning directly on the nozzle.

The high-flow design enables higher energy output than stock nozzles, improving power and field performance.

The nozzle comes supplied with:

• pre-installed adjustment screw
• pre-installed O-rings
• drop-in ready configuration

Main features

• Adjustable nozzle for G&G LevAR platforms
• Compatible with both 15" and 7" versions
• Adjustable output from approximately 1J to 2.2+J
• High-flow performance design
• Higher energy potential than stock nozzle
• Adjustment screw included
• Pre-installed O-rings
• Drop-in installation with no complex modifications
• Suitable for CQB and sniper configurations

Compatibility

• G&G LevAR 15"
• G&G LevAR 7"

Recommended setups

• Works perfectly with the 4UAD "4UANTUM" AEG bucking
• Improves consistency and range over the stock setup

Technical information

• Screw requires a 2 mm hex key
• Recommended to use blue Loctite or PTFE tape on threads
• Final power output depends on gas, BB weight, and temperature

Note: listed power settings can be easily achieved using standard green gas at room temperature with heavyweight BBs.