Autobot Electric SPEEDLOADER 1400 BBs EMG (EMG-24198)

BRAND EMG

The AUTOBOT Mid-Cap automatic speedloader is designed to speed up the loading of airsoft magazines while reducing the effort required by conventional manual speedloaders. Its powerful electric motor automatically feeds BBs into magazines and can handle even particularly stiff follower springs.

The hopper holds up to 1400 BBs and features a closable lid. The internal mechanism uses high-strength CNC-machined gears and a polished CNC stainless steel tube to support smooth BB feeding. The lightweight, durable DuPont polymer body features customisable Dot Matrix panels on both sides, allowing you to add your name or an identification marking.

Key Features

• Automatic electric loading: the motor feeds BBs into the magazine without repeatedly operating a manual speedloader.
• 1400 BB capacity: large hopper with a closable lid, suitable for filling several magazines consecutively.
• CNC internal mechanism: high-strength gears and a polished CNC stainless steel feeding tube.
• Li-Po battery power: compatible with 7.4V or 11.1V batteries fitted with a T-Dean connector.
• Four adapters included: enable the loader to be used with different types of airsoft magazines.
• Unloading function: the AEG magazine adapter can also be used to transfer BBs from a magazine back into the AUTOBOT hopper.
• Customisable Dot Matrix panels: located on both sides of the body, allowing you to add a name or identification marking.
• Reduced loading times: according to the manufacturer, magazines with particularly stiff springs can be filled in under 20 seconds, while GBB and other low-capacity magazines can be filled in under 3 seconds.
• Stated battery performance: a 600mAh Li-Po battery can load approximately 90,000 BBs per charge, according to the manufacturer.

Technical Specifications

• Type: automatic electric airsoft magazine loader
• Hopper capacity: 1400 BBs
• Body material: DuPont polymer
• Feeding tube: polished CNC stainless steel
• Internal gears: CNC-machined
• Power supply: 7.4V or 11.1V Li-Po battery
• Connector: T-Dean (T-Plug)
• Maximum battery voltage: 11.1V
• Battery compartment dimensions: 19 × 26 × 73 mm
• Recommended battery type: HPA Micro / Mini Stick
• Approximate performance with a 600mAh battery: 90,000 BBs loaded
• Number of included adapters: 4

Package Contents

• 1 EMG AUTOBOT automatic speedloader
• 4 adapters for different types of airsoft magazines

Warnings: the battery is not included. Use only 7.4V or 11.1V Li-Po batteries with a T-Dean connector. Do not use batteries with a voltage higher than 11.1V.

Loading precaution: the motor can overcome the resistance of particularly stiff magazine springs. Do not overfill the magazine. Stop loading once its maximum capacity has been reached to avoid excessive stress on the magazine, feeding mechanism or AUTOBOT loader.