ALUMINUM CNC HOP UP CHAMBER IE PRO FOR M4/M16 AEG MAXX MODEL (MX-HOP004PRO)

MAXX MODEL

MX-HOP004PRO

0.1  kg

This product is no longer in stock

59,90 €

Notify me when available

More info

BRAND MAXX MODEL

Compatible AEG ICS CXP/CS4/EBB rifles.
CNC Aluminum Hopup Chamber IE Pro with Latching System unit is specifically
designed for ICS CXP / CS4 / EBB M4 / M16 Airsoft Rifle series use only, and
prevents dropping BBs after removing magazine.
The Hopup Chamber IE unit Airsoft Rifles.
The Hopup Chamber IE unit is equipped with 2 Vinyl Covers on both sides.
The Hopup Chamber IE unit has a Dial-Knob built-in for precise adjustments and
specially re-engineered the Hopup Arms to work with R-hop, Flat-Hop and Standard-
Hop single shot. CNC Brass Threaded Slot Pin can be easily removable for
adjustment and maintenance.
The Hopup Chamber IE unit is well engineered to accept the full range of Air Seal
Nozzle's length from 20.50mm to 21.00mm, and fully compatible with most
aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hopup Chamber IE Housing is equipped with 3 O-rings, 3 Compression Springs
on top, right and left.
BBW in the Hopup Chamber for the first time in the Hopup Chamber.
And yet, the Latching System will be automatically opened for fast shooting after the
magazine re-inserted. The Latching System can also be open to the BBs from Hopup
Chamber by hand.

*** LED and Electronic Modules can also be added to this hopup chamber unit as an
option for BBs to glow in the dark. Operating Voltage from 7VDC to 20VDC (2-5 cells
LiPo, 6-16 cells NiCad).
*** Test results: FPS might be increased by 5% to 10%. Please check your FPS!

  includes
1 x CNC Aluminum Hopup Chamber IE Pro with Latching System unit
2 x CNC Vinyl Covers
1 x CNC Aluminum Standard-Hop Arm
1 x CNC Aluminum R-Hop Arm
1 x Standard Rubber-Hop Nub Damper
1 x Silicone Rubber R-Hop Nub Damper
1 x CNC Aluminum 5mm length Precision R-Hop Nub
1 x CNC Aluminum 6mm length Precision R-Hop Nub
1 x CNC Brass Threaded Slot Pin
1 x CNC Delrin Locking C-Clip
1 x CNC Barrel Brass Spacer
1 x Steel Central Compression Spring

Specification
Overall Length: 52.25mm
Overall Height: 38.5mm
Hub Outer Diameter (to fit into Outer Barrel): min 12mm
Inner Diameter Hub (to fit Nozzle): max 8mm
Feeder Outer Diameter (to fit magazine): min 9.25mm
Feeder Length (to fit magazine): 6.25mm max
Material: Aluminum 6061

Features
Aluminum with tight tolerances to provide better accuracy, consistency, and durability.
Specifically designed for ICS CXP / CS4 / EBB M4 / M16 Airsoft Rifle series only.
BB with the Locking System for the prevention of BBs after removing the magazine.
Automatically opened Latch fully for fast shooting after the magazine re-inserted.
Manually opened Latch to release.
Dial Knob built-in for precise adjustments.
Specially re-engineered the Hopup Arms to work with R-hop, Flat-Hop and Standard-
Hop precisely and consistently.
Removable Brass Threaded Slot Pin for adjustment and maintenance.
Accepts wide range of Air Seal Nozzle's length from 20.50mm to 21.00mm.
Fully compatible with aftermarket soft and hard rubber bucking without losing FPS or
dropping BBs.
Equipped with 3 O-rings, 3 Compression Springs on top.
Bumblebee on the sides of a hopup chamber.
LED and Electronic Modules ready! Operating Voltage from 7VDC - 20VDC (2-5 cells
LiPo, 6-16 cells NiCad).

Reviews

No customer reviews for the moment.

Write a review



Latest news

giu 18, 2019

HOLIDAYS

mag 8, 2019

PCC9 COMBO

mag 2, 2019

PX9 X9 CLASSIC ARMY

Viewed products

On sale