This product is no longer in stock
Warning: Last items in stock!
BRAND MAXX MODEL
Compatible M4 / M16 rifles.
For AEG series electric rifles.
CNC Aluminum Hopup Chamber TE Pro with Latching System unit is specifically
designed for fast feeding and preventative BBs after removing magazine on M4 / M16
series AEG Airsoft Rifles.
The Hopup Chamber TE unit is a reliable aircraft to provide better accuracy,
consistency, and durability for your airsoft rifles.
The Hopup Chamber.
The Hopup Chamber TE unit has a Dial-Knob built-in for precise adjustments and
specially re-engineered the Hopup Arms to work with R-hop, Flat-Hop and Standard-
Hop single shot. CNC Brass Threaded Slot Pin can be easily removable for
adjustment and maintenance.
The Hopup Chamber TE is a non-flammable machine.
The Hopup Chamber is a room with 3 O-rings, 3 Compression Springs on top, in the
center of the room. 11mm or 12mm bore.
BBW in the Hopup Chamber for preventive BBs after removing the magazine.
And yet, the Latching System will be automatically opened for fast shooting after the
magazine re-inserted. The Latching System can also be open to the BBs from Hopup
Chamber by hand.
*** LED and Electronic Modules can also be added to this hopup chamber unit as an
option for BBs to glow in the dark. Operating Voltage from 7VDC to 20VDC (2-5 cells
LiPo, 6-16 cells NiCad).
*** Test results: FPS might be increased by 5% to 10%. Please check your FPS!
1 x CNC Aluminum Hopup Chamber TE Pro with Latching System unit
2 x CNC Vinyl Covers
1 x CNC Aluminum Standard-Hop Arm
1 x CNC Aluminum R-Hop Arm
1 x Standard Rubber-Hop Nub Damper
1 x Silicone Rubber R-Hop Nub Damper
1 x CNC Aluminum 5mm length Precision R-Hop Nub
1 x CNC Aluminum 6mm length Precision R-Hop Nub
1 x CNC Brass Threaded Slot Pin
1 x CNC Delrin Locking C-Clip
1 x CNC Barrel Brass Spacer
1 x Steel Central Compression Spring
Overall Length: 52.25mm
Overall Height: 37.75mm
Hub Outer Diameter (to fit into Outer Barrel): min 12mm
Inner Diameter Hub (to fit Nozzle): max 8mm
Feeder Outer Diameter (to fit magazine): min 9.25mm
Feeder Length (to fit magazine): 6.25mm max
Material: Aluminum 6061
Aluminum with tight tolerances to provide better accuracy, consistency, and durability.
Designed for fast feeding BBs and prevent dropping BBs after removing magazines
on M4 / M16 series AEG Airsoft Rifles.
BB with the Locking System for the prevention of BBs after removing the magazine.
Automatically opened Latch fully for fast shooting after the magazine re-inserted.
Manually opened Latch to release.
Dial Knob built-in for precise adjustments.
Specially re-engineered the Hopup Arms to work with R-hop, Flat-Hop and Standard-
Hop precisely and consistently.
Removable Brass Threaded Slot Pin for adjustment and maintenance.
Accepts wide range of Air Seal Nozzle's length from 20.50mm to 21.00mm.
Fully compatible with aftermarket soft and hard rubber bucking without losing FPS or
Equipped with 3 O-rings, 3 Compression Springs on top.
Bumblebee on the sides of a hopup chamber.
Compatible to any V2 gear boxes with 11mm or 12mm bore.
LED and Electronic Modules ready! Operating Voltage from 7VDC - 20VDC (2-5 cells LiPo, 6-16 cells NiCad).
No customer reviews for the moment.
Purchase a gift voucher